Vol. 22 No. 2 (2018): Regular Issue

Engineering Journal
Volume 22 Number 2
ISSN: 0125-8281
DOI: 10.4186/ej.2018.22.2

Published: 2018-03-30

Environment, Energy and Natural Resources

A Novel Configuration Fluidized Bed Reactor for Nitrate Reduction and Low Strength Anaerobic Wastewater Treatment

Phatchariya Rungkitwatananukul, Chaiyaporn Puprasert, Supanee Nomai, Thawatchai Chintateerachai, Wiboonluk Pungrasmi

1-12
- PDF
Effect of Water Hardness and pH on Adsorption Kinetic of Arsenate on Iron Oxide

Dao Janjaroen, Pondetch Dilokdumkeng, Preawvanit Jhandrta

13-23
- PDF
Particulate Matter Monitoring Using Inexpensive Sensors and Internet GIS: A Case Study in Nan, Thailand

Sanphet Chunitiphisan, Sirima Panyamethekul, Suree Pumrin, Garavig Tanaksaranond, Thawat Ngamsritrakul

25-37
- PDF
Hazardous Waste Management in the Department of Environmental Engineering, Faculty of Engineering, Chulalongkorn University

Jantarawan Tancharoen, Manaskorn Rachakornkij

39-46
- PDF

Modern Engineering Technology

Electronic and Ionic Conductivities Enhancement of Zinc Anode for Flexible Printed Zinc-Air Battery

Jutamart Chotipanich, Amornchai Arpornwichanop, Tetsu Yonezawa, Soorathep Kheawhom

47-57
- PDF
Barriers of Adoption Building Information Modeling (BIM) in Construction Projects of Iraq

Wadhah A. Hatem, Abbas M. Abd, Nagham Nawwar Abbas

59-81
- PDF
Effects of Pulverized Burnt Clay Waste Fineness on the Compressive Strength and Durability Properties of Blended Cement Concrete

Emmanuel Onaivi Ajayi, Adewumi John Babafemi

83-99
- PDF
Spur and Helical Gear Sliding Loss Model with Load Distribution Pattern on Gear Tooth Surface

Natcha Ponchai, Jetsada Phraeknanthoe, Chanat Ratanasumawong

101-115
- PDF
Design of Hip Simulation Machine for Hip Labrum Testing

Chanatkarn Angsutanasombat, Panya Aroonjarattham, Nadhaporn Saengpetch, Pornsak Nirunsuk, Kitti Aroonjarattham, Chompunut Somtua

117-130
- PDF
The Effect of Cylindrical and Triangular Pillars on Changes in Water Levels at Channel Bends

M. Galib Ishak, Siti Rahmi Oktavia

131-140
- PDF
A Suitable Constitutive Model for Solid Tire Analysis under Quasi-Static Loads using Finite Element Method

Juthanee Phromjan, Chakrit Suvanjumrat

141-155
- PDF
Recommender System Based on Expert and Item Category

Thanaphon Phukseng, Sunantha Sodsee

157-168
- PDF
Extrusion Blow Molding Simulation using Cross-Section Technique for Complex Shape Bottles

Chakrit Suvanjumrat, Nathaporn Ploysook, Ravivat Rugsaj

169-183
- PDF
Test and Finite Element Analysis of Gravity Load Designed Precast Concrete Wall Under Reversed Cyclic Loads

Preeda Chaimahawan, Chayanon Hansapinyo, Punlop Phuriwarangkhakul

185-200
- PDF